Using engineered wood products throughout your construction project is the clear environmental choice. Engineered wood has so many environmental advantages over traditional dimensional lumber, that it is hard to understand why anyone would not use it in every construction project that they under take.
Traditional lumber (especially large sized pieces) are typically milled from large trees which are often centuries old. These large trees are only available great distances from population centers where the lumber is needed. Cutting down large, ancient trees in remote wilderness areas is devastating on the environment. Wildlife habitat, rain run-off protection, and scenic beauty are all destroyed by harvesting virgin timber. Clearcutting is still practiced by most tree harvesting operations, because it is the most economical way to produce lumber, yet the most damaging to the environment.
Since most engineered lumber is processed from trees grown in sustainable forests near urban centers, the new roads required to be built in virgin timberlands, to harvest old growth trees, is eliminated from the process. The environmental damage that is inflicted on wilderness areas by the entire logging process of virgin timber is enormous. Any amount of this damage that we can prevent by using engineered lumber products produced from sustainable forestry practices will benefit us and future generations. used engines near me
Engineered lumber products, like engineered wood floor joists also known as wood I-joists, are made out of wood chips sourced from smaller trees. An engineered wood I-joist that is 20 feet long and 24 in depth can be manufactured from pieces of wood only inches long and millimeters thick. Compare that to the size of tree that is required to produce a piece of lumber the same dimensions. Engineered wood products can be manufactured from smaller, quick growing trees which are commercially raised on sustainable forest land. These trees grow to a harvestable size in decades, not centuries as required for traditional lumber products.
Engineered lumber products require a significantly reduced amount of fossil fuels to harvest and transport the finished product to the job site. The smaller trees that are grown in sustainable forests are located closer to urban areas, so the distance that the material travels is greatly reduced. Engineered wood is lighter than traditional lumber and can be cut to exact lengths required for each project, so there is less weight that needs to be transported, substantially reducing fuel emissions into the environment.
The adhesives used to bond these products together are low or non emitter’s of VOC’s. Manufacturers are constantly researching new and better adhesives which are stronger, more durable, and more eco friendly.
The process required to manufacture these products strives to be as eco friendly as possible.
For all the reasons mentioned above, engineered wood products are the construction material of choice.
Once contractors become aware that engineered wood products are easier to install, provide a better finished product, and are less costly than traditional lumber, we will all benefit from the decreased impact on the environment. Building with engineered lumber products is the right thing to do, for the homeowner and the environment.